3m × 26m aac autoclave exported to Malaysia

3m × 26m aac autoclave exported to Malaysia

  • Internal diameter: 1.65-3.2m
  • Max working pressure: 1.0-1.5Mpa
  • Designed Pressure:1.1-1.6Mpa
  •  
  • Max temperature 183-201°C
  • Certification: ISO&ASME&IBR
  • Place of Origin: Zhengzhou, China
  •  
  • Packaging:standart export packing
  •  
  • Delivery:60days after payment
  •  
  • Payment Terms:L/C,T/T
  • Port: Qingdao/Shanghai
Product Description

3m × 26m aac autoclave is the large pressure vessel that can steam the pressurized bricks or normal bricks in Malaysia which is made from aerated concrete blocks, sand and pulverized fly ash, and then complete the reaction of Cao-SiO2-H2O. The aac autoclave is also widely used in other Malaysia productions that need to be steamed with high pressure.

AAC autoclave is key equipment which has a widely application in Malaysia building material factory to autoclaved cure different kinds of building materials. It is also used in areas of chemical, textile, wood, Glass, Brick, metallurgy, Rubber, military industry. Convenient operation, security and reliable are its advantages.

3m × 26m aac autoclave for sale to Malaysia overview

Structure: The main parts of 3m × 26m aac autoclave are autoclave door ,body apparatus, tank cover device, the door swing device, hand reducer, safety interlocks, bearings, insulation, sealing devices, plumbing valves and meters, etc., also attached with drainage and electric control devices. Various structural designs and manufacturing can be safe and reliable. Also can ensure the autoclave more stable in performance in Malaysia.

Process of 3m × 26m aac autoclave
a) After welding kettle door, it must proceed with annealing heat treatment.
b) Polish toothed cutter of flange of autoclave body, and carry out magnetic particle testing.
c) Use double scale container board, and ensure the longitudinal joint of each section.
d) Carry out the physical and chemical test (stretch, impact), ensure its strength.
e) Welds are 100% X-ray detection, then carry out hydraulic test of 2.1MPa after passing. The whole process is complete inspected by CSEI factory inspection, and leave factory after stamp and signature.

Features
1. 3m × 26m AAC autoclave is steel-made horizontal tube-type device. The lid is made by pressing the whole steel plate Q345R (16MnR). The lid flange and body flange are made by forging the whole steel plate (model Q345R (16MnR)). The welding of pressure parts is heat-treated and go through strict non-destructive testing as the relevant standards required.
2. The door of AAC autoclave is mobile shutter structure. There is two opening ways which is top door and side door. It equipped with a safety interlock protection device.
3. The sealing of the door uses imported rubber seals from professional manufacturers. Simple installation, good seal and long service life. The supports could be three kinds as different parts required: fixed support, mobile support and end dedicated support.
4. The AAC autoclave 3m × 26m in Malaysia has necessary valves and meters such as safety valve, pressure gauge, temperature measurement devices, intake valve, exhaust valve, sealing ball valve and hydrophobic valve. It also has decontamination tank for users to choose. 

Pre:AAC autoclave for aerated concrete 200m³ per day

Next:Horizontal autoclaves for AAC making

Other products from Our company

Hot products

2m×33m industrial autoclave

2m×33m industrial autoclave for sale

2m×33m industrial autoclave can be typed as side-opening, top-opening, electric opening, pneumatic opening, and hydraulic opening. Industrial autoclaves are manufactured by ZG Boiler working pressure+ More

News

Projects

Contact

  • Email: [email protected]
  • Tel: 86-86678488
  • Address: NO.88 Science Road,High and New Technology Development District,Zhengzhou,China