Autoclave maintenance

Autoclave is a large, heavy-duty, large-scale pressure vessel. The maintenance of the autoclave is an extremely important task. Maintenance can increase the life of the machine. It should be closely coordinated with the supporting operation and maintenance, and full-time personnel should perform on-duty inspections.
                                                                                                  Autoclave (1).JPG 

Inspection steps

1. The lubricating oil injected into the machine must be clean, the seal must be good, and the main oil filling place of the machine

Rotary bearing, roll bearing, all gears, moving bearings, sliding plane

2. Pay attention to whether the work of various parts of the machine is normal.

3, if the impact sound of rotating gears during operation should immediately stop the inspection and eliminate.

4, pay attention to check the wear of wear parts, always pay attention to replace the worn parts.

5, put the mobile device's chassis plane, should go out of dust and other things to avoid the machine encountered the material can not be broken when the active bearing

Can not move on the chassis, resulting in serious accidents.

6. If the bearing oil temperature rises, you should immediately stop and check the cause to eliminate it.

7. Newly installed tires are prone to loosening and must be checked frequently.
 

Follow the above steps to overhaul and maintain the autoclave. It can increase the life and operational efficiency of the equipment, and it can also ensure safety. Staff need to carefully check and inspect every part.

Pre:Circulating fluidized bed technology

Next:How about biomass fuel?

Hot products from Our company

Hot products

Three major sources of noise in the boiler

Three major sources of noise in the boiler for sale

Noise pollution has become one of the three major pollutions in modern society. We often see complaints in the news due to boiler noise. Existing boilers are relatively noisy and are often subject to + More

News

Projects

Contact

  • Email: [email protected]
  • Tel: 86-86678488
  • Address: NO.88 Science Road,High and New Technology Development District,Zhengzhou,China